Name: PERMABOND 4C10
Brand: Permabond, LLC
SKU: PERMABOND 4C10

Main features

Low-Viscosity Fine-Gap Bonding
Fast 5-20 Second Fixture
Hard-to-Bond Rubber Adhesion

Product Description

PERMABOND 4C10 is a low-viscosity ethyl cyanoacrylate adhesive for rapid bonding of plastics and elastomers, including hard-to-bond natural rubber, EPDM, and butyl rubber. Typical viscosity is 30 to 50 mPa s at 25 deg C, supporting thin bondlines and a maximum gap fill of 0.1 mm. Fixture times are typically 5 to 10 seconds on Buna N rubber, phenolic, PVC, and ABS, with steel reaching fixture strength in 10 to 15 seconds. The cured adhesive also provides measured shear strength on steel, aluminum, zinc, and selected engineering plastics.

Key features

Low-Viscosity Fine-Gap Bonding: Typical viscosity of 30 to 50 mPa s supports a maximum gap of 0.1 mm.
Fast Multi-Substrate Fixture: Fixture strength is typically reached within 5 to 20 seconds across the specified rubber, plastic, and steel substrates.
Hard-to-Bond Rubber Capability: The grade is specified for natural rubber, EPDM, butyl rubber, and hard-to-bond plastics.

TDS, SDS & Technical Documents

4C10_TDS-1

English (Technical Data Sheet (TDS))

Technical Specifications

General Properties

Appearance

Colourless

Chemistry Type

Ethyl cyanoacrylate

Specific Gravity

1.1

Physical Properties

Viscosity

30-50 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Property	Value	Unit	Method / condition
Chemical composition	Ethyl cyanoacrylate	-	Typical as supplied
Appearance	Colourless	-	Typical as supplied
Viscosity	30 to 50	mPa s	Typical at 25 deg C
Specific gravity	1.1	-	Typical
Maximum gap fill	0.1	mm	Typical curing property
Fixture / handling time - steel	10 to 15	seconds	0.3 N/mm^2 shear strength